PTFE Metering Valve

VT PTFE precision needle valves
MVT™ Metering valves are constructed of PTFE and PCTFE materials. Non-fluid contacting external parts are made of anodized aluminum. Valves are offered in three conveniently overlapping flow ranges. Safety handle prevents over tightening and facilitates fine metered regulation. MVT™ valves are useful in regulating the flow of corrosive gases and liquids. They may be used in pressure or non-critical vacuum service and serve as bubble tight shutoff valves.

SPECIFICATIONS:

MAXIMUM OPERATING PRESSURE 75 psig (517 kPa)
MAXIMUM OPERATING TEMPERATURE 150°F (65°C)
VALVE STEM eight turns to full open, non-rising type
MATERIALS OF CONSTRUCTION
FLUID CONTACTING MATERIALS PTFE (body and o-ring); CTFE (valve spindle)
NON-FLUID CONTACTING MATERIALS shell + handle - aluminum (black anodized).
ORIFICE SIZE 0.125 inch diameter (3.175 mm)

MODEL NUMBER CONNECTION MAXIMUM FLOW (ML/MIN)   

        AIR          WATER       


  CV
VM1TTOA 1/8" FNPT
600                     36 0.003
VM3TTOA
1/8" FNPT 3000                  180 0.015
VM6TTOA
1/8" FNPT 30000                  1800 0.150
VM1TTOF
1/4" COMP 600                   36 0.003
VM3TTOF
1/4" COMP 3000                   180 0.015
VM6TTOF
1/4" COMP 30000                 1800 0.150
VM1TTOG
GLASS NIPPLE
600                 36 0.003
VM3TTOG
GLASS NIPPLE 3000                180 0.015
VM6TTOG
GLASS NIPPLE 30000                1800 0.150

There are no products to list in this category.
Copyright © 2017 Comeau Technique Ltd. Powered by Zen Cart