Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Legato Dual Syringe Programmable Touch Screen Infusion Withdrawal Pump
Features
- Syringes (Min/Max) - 0.5 µl to 10 ml
- Flow Rate - Minimum (0.5 µl syringe): 1.28 pl/min
Maximum (10 ml syringe): 25.99 ml/min - Display - 4.3 WQVGA TFT Color Display with Touchpad
- Regulatory Certification - CE, UL, CSA, CB Scheme, EU RoHS
Manufacturer | KD Scientific |
---|
Accuracy | ±0.5% |
Syringes (Min/Max) | 0.5 µl to 10 ml |
Flow Rate | Minimum (0.5 µl syringe): 1.28 pl/min Maximum (10 ml syringe): 25.99 ml/min |
Display | 4.3 WQVGA TFT Color Display with Touchpad |
Non-Volatile Memory | RS485 - IEEE-1394 6 pos USB - Type B I/O & TTL - 15 pin D-Sub Connector |
Linear Force (Max) | 13.6 kg (30 lb) @ 100% Force Selection |
Drive Motor | 0.9 Stepper Motor |
Number of Microsteps per one rev.of Lead Screw |
15,360 |
Step Revolution | 0.069 µm/step |
Step Rate - Minimum | 27.5 sec/µstep |
Step Rate - Maximum | 26 µsec/µstep |
Pusher Travel Rate - Minimum | 0.15 µm/min |
Pusher Travel Rate - Maximum | 159 mm/min |
Power | 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse |
Dimensions | 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in) |
Operating Temperature | Continuous |
Humidity | 20% to 80% RH non condensing |
Classification | Class 1 |
Pollution Degree | 1 |
Installation Category | 11 |
Regulatory Certification | CE, UL, CSA, CB Scheme, EU RoHS |
Dual syringe infuse/withdraw with program option for 2 programs. 50 steps each. Accommodates syringes 0.5 µl to 10 ml. User definable flow rates with selectable target volume or time values to control the total infusion volume. Legato™ 111 Syringe Pump
- Holds one or two syringes from 0.5 µl to 10 ml
- High resolution color touch screen
- Unparalleled ease of use
- Touch pad "lock" feature
- LED light on front panel
- Full metal chassis
- Built in syringe table
- Up to 30 lb/13 kg linear force
- Advanced microstepping techniques
- Built in RS485 interface
- USB port
- I/O & TTL interface
- Continuous mode of operation
- Spill dam
- Programmable