Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Norprene Industrial Grade Tubing 5/8 x 7/8 x 1/8 in x 50 ft
Features and Benefits
- Superior weathering
- Abrasion resistant
- Outstanding flexural fatigue resistance
- Wide temperature range (-75°F to 275°F)
- Low gas permeability versus rubber tubing
- Ozone* and UV light resistant
|Inner Dimension (I.D)||5/8" (15.9mm)|
|Outer Dimension (O.D)||7/8" (22.2mm)|
|Tube Wall Thickness||1/8" (3.2mm)|
|Property||ASTM Method||Value or Rating|
|Tensile Strength, psi (MPa)||D412||1000 (6.9)|
|Brittleness by Impact Temp., °F (°C)||D746||-75 (-60)|
|Durometer Hardness (Shore A), 15 Sec||D2240||61|
|Maximum Recommended Operating Temp., °F (°C)||-||275 (135)|
|Tear Resistance, Ib-f/in (kN/m)||D1004||120 (21.0)|
|Tensile Set. %||D412||47|
|Water Absorption, % at 73°F (23°C) for 24 hrs||D570||0.30|
High-performance Chemical Dispensing Alternative to Rubber Tubing
Specially formulated for chemical dispensing, Tygon® A-60-G tubing outperforms neoprene, EPDM and other general-purpose tubing in test after test, application after application. It will not weaken or crack after years of exposure to heat and ozone, providing longer pump life in industrial and institutional cleaning-chemical dispensing applications. Engineered for outstanding performance and on-the-job reliability, Tygon® A-60-G tubing handles temperatures ranging from -75°F (-60°C) to 275°F (135°C), allowing the use of one material within a broad range of temperatures. It is heat sealable and can be joined without fittings. It also offers excellent resistance to inorganic fluids (acids and bases)
Unequalled Life in Peristaltic Pump Applications
Peristaltic pumps are used in a wide range of markets and applications, including industrial and institutional cleaning-chemical dispensing. The universal requirement common to these applications is the ability of the tubing to withstand the constant high flexural fatigue exerted by the pump rollers. Tygon® A-60-G tubing outlasts and outperforms virtually all other general service tubing in peristaltic pump applications due to its high flexural fatigue strength. (For additional details on peristaltic pump tubing, refer to the comprehensive Saint-Gobain Performance Plastics Peristaltic Pump Tubing section on www.processsystems.saint-gobain.com).
Ideal for Use in Vacuum Systems
Tygon® A-60-G tubing is available in standard vacuum sizes that will withstand a full vacuum (29.9" [759 mm] of mercury) at 73°F (23°C). Unlike typical rubber vacuum tubing, Tygon® tubing resists the cracking and aging that are frequent causes of vacuum tubing failure.