Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
TX20 pH and ORP Controller
CA$798.74
SKU
TX20
| Manufacturer | Sensorex |
|---|---|
| Hazardous | No |
| Measurement Range (pH) | -2.00 to 16.00pH, 0.01 pH resolution, +/- 0.1% accuracy |
| Measurement Range (ORP/mV) | -1999mV to 1999mV, 1mV resolution, +/- 0.1% accuracy |
| Temperature Range | -10 °C to 120 °C , 0.1 °C resolution, +/- 0.3 °C accuracy |
| Control Type/Relay Output | 2 ON/OFF controls / 5A at 115VC AC or 2.5A at 220V AC, resistive load only |
| Enclosure | 1/8 DIN (3.78″ L x 3.54″ W x 1.89″ H) |
| Ambient Operating Temperature | 0° C to 50° C |
| Temperature Compensation | Auto/Manual (-10 °C to 120 °C) |
| Power Requirement | 100-240 VAC, max 500 ohm load |
| Weight | 290g |
Our TX20 Automatic pH Controller is a convenient and cost effective solution for monitoring and maintaining pH and ORP. This controller allows you to save space in your panel with its small footprint 1/8 DIN case. You can also use the two on/off relay outputs to program process control, including management of alarms and chemical dosage systems.
- Easy to install 1/8 DIN Case
- Two on/off controls (relay outputs)
- Compatible with sensors that utilize spade lug connectors
- Clear LCD displays pH or ORP and temperature
- 100-240 VAC power supply
Note: The TX20 Automatic pH Controller is only compatible with sensors that have spade lug connectors.
Write Your Own Review