Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Tygon E3603 3/32 x 5/32 x 1/32 in x 50 ft
Regulatory Compliance
- Applicable FDA Food Additive Regulations (21CFR170-189)
- NSF51
- REACH (EC) No 1907/2006
- Regulation (EC) No 1935/2004 and Regulation (EU) No 10/2011
- Japan Food Sanitation Law No 370, 1959
- Contains no chemicals listed in California's Proposition 65
Manufacturer | Saint Gobain |
---|---|
Inner Dimension (I.D) | 3/32" (2.4mm) |
Outer Dimension (O.D) | 5/32" (4.0mm) |
Tube Wall Thickness | 1/32" (0.8mm) |
Property | ASTM Method |
Value or Rating |
Durometer Hardness, Shore A, 15s |
D2240 | 56 |
Tensile Strength, psi (MPa) | D412 | 1,750 (12.1) |
Ultimate Elongation, % | D412 | 425 |
Tear Resistance, lb-f/in (kN/m) | D1004 | 173 (31.0) |
Specific Gravity | D792 | 1.21 |
Water Absorption, % at 73°F (23°C) for 24 hrs. |
D570 | 0.21 |
Compression Set Constant Deflection, % at 158°F (70°C) for 22 hrs. |
D395 Method B |
64 |
Brittleness by Impact Temp.,°F (°C) |
D746 | -51 (-46) |
Maximum Recommended Operating Temp., °F (°C) |
— | 165 (74) |
Tensile Stress @ 100% Elongation, psi (MPa) |
D412 | 582 (4.0) |
Tensile Set, at 75% Elongation | D412 | 95 |
Color | — | Clear |
Clear, Flexible Phthalate-Free Tubing
Tygon S3 E-3603 flexible tubing handles the most stringent foods and beverages. It is crystal clear, crack-resistant as well as non-oxidizing, non-contaminating, and less permeable than rubber tubing. Tygon S3 E-3603 is specially formulated for resistance to flex-fatigue and abrasion and offers superior life, which minimizes the labor and expense of replacement. Its clear, glassy smooth inner bore helps prevent buildup to facilitate cleaning. Coils are marked at 30.4 cm intervals for easy measuring. Saint-Gobain's bio-based Tygon S3™ flexible tubing line combines the high-performance standards customers demand with an eco-friendly, phthalate-free design.
Typical Applications
- Peristaltic pump dispensing of juices, iced tea, water and other beverages
- Beverage transfer under chilled or ambient conditions
- Custome non-dairy creamer and flavor dispensing
- Installations in tight confined spaces within complex food filling or flavoring systems
- Dispensing of batter, pastes, and other low-viscosity food materials
- Filtered water transfer (including reverse osmosis)
- Transfer of plant-based food ingredients
Features
- Outstanding chemical resistance
- Lot-to-lot consistency for reproducible results
- Non-oxidizing and non-contaminating
- Smooth, polished inner wall
- Slips easily over fittings and grips securely for simple set-up
- Contains no BPA or phthalates
- Standard sizes available to hold full vacuum at room temperature