Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Caframo Anchor and Sweep Impeller U044SW
- Flow Pattern - Tangential
- Blade Diameter - 102 x 102 mm (4 x 4 in) anchor blade
- Blade and Sweep Diameter - 145 mm (5 ¾ in)
|Blade Diameter||102 x 102 mm (4 x 4 in) anchor blade|
|Blade and Sweep Diameter||145 mm (5 ¾ in)|
|Blade and Sweep Dimensions||150 x 145 mm (6 x 5 ¾ in)|
|Shaft Length||914 mm (36 in)|
|Shaft Diameter||9.5 mm (⅜ in)|
|Material - Impeller||Electropolished 316L stainless steel|
|Material – Sweep accessory||Silicone SCX 0570|
|Weight (U044SW)||1.5 kg (3.4 lb)|
|Weight (SW4)||0.5 kg (1.2 lb)|
Achieve enhanced process results with the addition of silicone sweep blades to our popular U044 anchor impeller. The impeller with sweep is effective for low speed, high viscosity mixing up to 38,000 mPas. The tangential flow 102 x 102 mm (4 x 4 in) anchor blade is welded to an 9.5 mm (⅜ in) diameter shaft, all electropolished 316L stainless steel. Sweep accessory blades slide over the anchor arms, enabling the combination to scrape sides of a standard 4 L beaker as it stirs. Sweep material silicone SCX 0570 is compliant with FDA 21 CFR 177.2600. A vessel clamp is required when using this impeller. Due to the torque required for effective stirring, we recommend using only with the Caframo overhead stirrer models BDC1850 and BDC3030.