Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Refillable Combination pH Electrode with Screw Connector HI1131S
Perfect for any laboratory use, the HI1131S is a s a glass-bodied combination pH electrode with a screw connector. With a double junction design and the ability to change out contaminated electrolyte, this economical pH electrode ensures great results in your laboratory and clean water testing.
- High temperature glass can stand up to the effects of elevated temperatures leading to longer probe life.
- Double junction design to prevent against contamination.
- Great for general laboratory use.
Manufacturer | Hanna Instruments |
---|---|
Electrodes Parameters | pH |
Electrode Connection | BNC |
Hazardous | No |
Note | Ships with heat pack(s) during winter months. |
Reference | double, Ag/AgCl |
Junction / Flow Rate | ceramic, single / 15-20 µL/h |
Electrolyte | 3.5M KCl |
Range | pH: 0 to 13 |
Recommended Operating Temperature | 0 to 100˚C (32 to 212˚F) - HT |
Tip / Shape | spheric (dia: 9.5 mm) |
Temperature Sensor | no |
Matching Pin | no |
Amplifier | no |
Body Material | glass |
Cable | coaxial; 1 m (3.3') |
Recommended Use | general purpose, high temperatures, laboratory general purpose |
Connection | Screw cap |
Hanna Instruments offers a wide variety of pH electrodes that are designed for many different applications. The type of glass used for sensing pH, bulb shape, body material, type of junction, type of reference and electrolyte used are just some of the design considerations.
The HI1131S uses high temperature (HT) glass, spherical bulb, glass body, single ceramic frit, double junction and is refillable with 3.5M KCl.
High-Temperature Glass Formulation
The measurement of pH at very high temperatures is detrimental to the sensitive glass bulb and will shorten the life of it. A pH electrode with general-purpose (GP) glass will have a resistance of 100 megaohms at 25oC while the resistance of HT glass is around 400 megaohms at 25oC. As the HI1131S is used at elevated temperatures the resistance decreases to approach the that of GP glass. The HI1131S is suitable to use with samples that measure from 0 to 100oC.
Spherical Glass Tip
The spherical bulb is for general purpose use. Other tip shapes include conic for penetration and flat tip for surface measurements.
Glass Body
The glass body is ideal for laboratory use. The glass is resistant to many harsh chemicals and is easily cleaned. The glass body also allows for a fast transfer of heat to the internal reference electrolyte. The mV generated by the reference cell is temperature-dependent. The faster the electrode reaches equilibrium, the steadier the reference potential.
Single Ceramic Double Junction Reference
The HI1131S is a double junction design. pH electrodes are available as single junction or double junction. See below for a complete description of the differences. The junction also known as a salt bridge is a necessary component of the electrical circuit. The movement of ions must flow through the junction for a steady reading. The outer reference has a single ceramic frit. The ceramic is a porous material that is easily fused with the glass body and has a similar expansion coefficient. A single ceramic junction has a flow rate of 15-20 μL/hour. Other junction types are available with higher flow rates and made with different materials.
Refillable
The HI1131S is a refillable probe. Since it is a double junction combination ph electrode the fill solution is the HI7082 3.5M KCl. This solution does not contain any silver as with a single junction electrode. The absence of silver will prevent any silver precipitate from forming at the junction surface and clogging it. Clogging of the junction will result in drifty and erratic readings.
BNC Connector
The HI1131S uses a screw connector. Screw connectors attach directly to the meter and can also be made interchangeable with other meters by using a Hanna BNC extension cables.