Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Ultra Pure Water (UPW) Tester HI98309
CA$98.00
SKU
98309
Features
- EC Range - 0.000 to 1.999 μS/cm
- EC Resolution - 0.001 μS/cm
- EC Accuracy - ±2% F.S.
| Manufacturer | Hanna Instruments |
|---|---|
| Hazardous | No |
| Note | Ships with heat pack(s) during winter months. |
-tester-hi98309.jpg)
| EC Range | 0.000 to 1.999 μS/cm |
| EC Resolution | 0.001 μS/cm |
| EC Accuracy | ±2% F.S. |
| EC Calibration | factory calibrated |
| Battery Type / Life | 1.5V (4) / approximately 120 hours of continuous use |
| Environment | 0 to 50°C (32 to 122°F); RH max 95% non condensing |
| Dimensions | 175 x 41 x 23 mm (6.9 x 1.6 x 0.9’’) |
| Weight | 95 g (3.4 oz.) |
| Ordering Information | HI98309 (UPW) is supplied with protective cap, calibration screwdriver (HI98308 only), batteries and instructions. |
| Warranty | 1 year |
The HI98309 UPW is the first pure water tester/conductivity meter to measure in 1/1000ths of micro-Siemens and provides on-the-spot and fast checks for minute traces of contamination in your water, assuring high quality of finished products in processes. A rugged, pocket-sized tester that features graphite electrodes to reduce polarization effects. The HI98309 comes already calibrated, done with freshly prepared low-conductivity solutions in factory due to the high instability of calibration solutions in the UPW range (below 2 µS/cm).
- Exposed temperature sensor for fast response
- Accurate readings of ultra low range 0.000 to 1.999 µS/cm
- Factory calibrated
Write Your Own Review